Yealink Phone Guides

• Related Articles

• Yealink + Plantronics CS530 Headset

  Here is how the cables and headset base should be setup to work with a Yealink phone. Set the dials at the bottom of the Plantronics Base to match the photo below. Next, connect the power and lifter cable (supplied with the Yealink EHS40) to the ...

• Paging/Multicast Algo & Yealink

  This guide outlines the configuration steps for setting up Algo Paging devices and multicast functionality with Yealink phones in an enterprise environment. Section 1: Add Algo Devices to the OktoRocket (CE) Portal Step 1: Navigate to Sites Select ...

• VoIP Network Requirements

  Purpose Application Protocol Domain / IP Address Destination Ports Media RTP/SRTP proxy.d14e.io UDP: 16384 - 32768 Signaling SIP proxy.d14e.io UDP: 5060 Signaling Secured SIP/TLS proxy.d14e.io TCP: 5061 Directory Services HTTPS *.digitalconcierge.io ...

• Cordless Phone Handset Replacement

  Deregistration First the faulty handset will have to be deregistered from the base station. If the old handset still works we recommend doing it from that handset, but any registered handset will work. Press the OK button to enter the main menu and ...

• 📞 Yealink: Hold, Park, and Transfer Quick Reference

  1. ? Placing a Call on Hold Use when you want to temporarily pause the call on your own phone. To Hold: During a live call, press the Hold soft key. The caller will hear hold music (if configured). The screen shows the call as on hold. To Resume: ...