The DC Wallboard is powered by a micro-computer (MC). Follow these steps to set up a new wallboard.

 

  1. Connect the mc's  HDMI port to your display.
  2. Connect a USB keyboard and mouse to the MC.
  3. Plug the mc into power.
  4. After the MC powers up the DC wallboard will open the web browser in full-screen mode. Since it is not connected to the network, it should display an error. Press F11 on the keyboard to exit full-screen mode.
  5. The two red x's indicate the mc isn't connected to wireless.                                                                                                                                                                                                                               mceclip0.png
  6. Click on the X's to select from an available wireless network:
    mceclip1.png
  7. Once Connected click on the VNC icon in the toolbar:
     mceclip2.png
  8. Note the IP address. This can be used to access the PI remotely.                                                                                           mceclip3.png
  9. Close the VNC screen and open the web browser. Refresh the screen and log in with the wallboard username and password. Once loaded, press F11 to enter full-screen mode. Use "CTRL +" and "CTRL -" to zoom the browser window to fit the entire the board properly.